Toshiba e-STUDIO 206L, Quick Start Manual

Page: 18 / 90

Chapter 1 PREPARATIONS
16
Placing originals
Original glass
1
Raise the Original Cover (optional) or the
Reversing Automatic Document Feeder (optional).
2
Place the original with its face down on the original
glass and align it against the left rear corner.
3
Lower the Original Cover (optional) or the Reversing
Automatic Document Feeder (optional) carefully.
Reversing Automatic Document
Feeder (optional)
1
Place the originals face up on the original feeder
tray.
2
Align the side guides to the original length.
Do not place any heavy objects (4 kg (9 lb.) or over) on
the original glass and do not press on it with force.
Breaking the glass could injure you.
A4-R
(LT-R)
B4
(LD)
• You need to select the original size by yourself when
placing the following originals whose sizes cannot be
detected correctly:
- Highly transparent originals (e.g. overhead
transparencies, tracing paper)
- Totally dark originals or originals with dark borders
- Non-standard size originals (e.g. newspapers,
magazines)
&
Copying Guide (PDF): “Chapter 3: BASIC COPY MODES”
- “Paper Selection”
• When placing mixed-size originals on the Reversing
Automatic Document Feeder (optional), adjust its side
guides to the widest original, and then align the originals
against the guide on the front side.