Toshiba e-studio 202L Printing Manual Download Page 92 | Manualshive

Page: 92 / 398

Toshiba e-studio 202L Printing Manual Download Page 92

2 Installing Client Software for Windows

92 Installing Client Software for IPP Printing

Installing Client Software for IPP Printing

This section describes how to set up the printer drivers for IPP printing which is available for
Internet connection.
To set up the printer drivers for IPP printing, install the printer drivers by Add Printer Wizard, and
then install the other software that you require.

y

Before installing the printer driver for IPP printing, check with your system administrator to
make sure of the following:

- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.

y

IPP Printing is only available for Windows 2000, Windows XP, Windows Server 2003, and
Windows Vista.

Installation for IPP Printing by Add Printer Wizard

Windows 2000/XP/Server2003

Installing the printer driver for IPP printing by Add Printer Wizard

The following describes an installation on Windows XP. The procedure is the same when Win-
dows 2000, Windows Server 2003 is used.

You must log into Windows as a user who has the “Administrators” or “Power Users” privilege.
You must log into Windows as a user who has the “Administrators” privilege when using Win-
dows XP/Server 2003.

1

Click [Start] and click [Printers and Faxes] to open the Printers and
Faxes folder.

y

If you are using the Windows 2000, click [Start], select [Settings], and click [Printers]
to open the Printers folder.

«
...
90
91
92
93
94
...
»

Summary of Contents for e-studio 202L















































































































































































































































































































































































































Reviews:

No comments