manualshive.com logo in svg

Toshiba e-studio 202L, Printing Manual, Page: 86 / 398

Share
Download
Toshiba e-studio 202L Printing Manual Download Page 86

2 Installing Client Software for Windows

86    Installing Client Software for SMB Printing

17

Select whether this printer is shared or not, and click [Next].

When you select “Shared”, you can also select the operating systems of printer drivers 
that you want to install for clients. If you select any operating systems, repeat the proce-
dure from Step 9 to 15 to install the printer drivers for selected operating systems.

18

Select "Yes (recommended)" to print a test page and click [Finish].

19

The installation is completed.

Before using the printer driver for printing, please configure the installed options of the 
equipment and department code (if required) on the printer driver.

 

 P.206 “Before Using the Printer Driver”

Windows 98/Me

Installing the printer driver for SMB printing by Add Printer Wizard

The following describes an installation on Windows 98.  The procedure is the same when Win-
dows Me is used.

Summary of Contents for e-studio 202L















































































































































































































































































































































































































Reviews:

No comments