manualshive.com logo in svg

Toshiba e-studio 202L, Printing Manual, Page: 127 / 398

Share
Download
Toshiba e-studio 202L Printing Manual Download Page 127

Installing Client Software from TopAccess    127

Installing Client Software from TopAccess

If the system administrator has uploaded the driver software to this equipment, you can use 
TopAccess to install the software on your workstation.

y

When using Windows Server 2003 that the Service Pack is installed, the installation from 
TopAccess cannot be performed.  In that case, please install the software in the other 
method.

y

For instructions on how to upload the software in the equipment, please refer to the 

TopAc-

cess Guide

.

Installing client software from TopAccess for Windows

1

In TopAccess, click the Install Software link at the bottom of the 
screen.

y

The Install Client Software page opens.

2

Click the “Install Client1” link to download the installer file.

3

Download the installer file on your desktop by following the 
prompts.

4

Double-click the “InstallClient1.exe” file that you downloaded.

y

The installer starts and the InstallShield Wizard dialog box appears.

Summary of Contents for e-studio 202L















































































































































































































































































































































































































Reviews:

No comments