Toshiba E-Studio 190F Operator'S Manual Download Page 140

Page: 140 / 154

140

NOTE

1. After identifying the problem and taking the recommended action, if the Information Codes

keep reoccuring or Information Codes that appear on your machine but are not listed above,
please contact your service representative.

Info.

Code

Meaning

Possible Action

Page

730

Cannot retrieve the Journal nor program the Internet
Parameters and the Auto Dialer remotely via email
from a PC.

Check that the Fax Parameter No. 158 (

Remote Update

) is set to “

Valid

”.

116

731

The dialer buffer for manual dialing was full (50
stations) when the Relay Transmission Request was
received.

Request the sender to resend the Relay
Transmission Request after the reserved
communication is finished.

800/814/

816/825

Machine was requested to relay a document or
Confidential Communication but has no capability.

Check with the other party.

826

Received Sub-address is not registered in the Auto
Dialer (One-Touch/ABBR. Dialing).

Check the Auto Dialer.
Check the remote station.

870

Memory overflow occurred while storing documents
into memory for transmission.

1. Transmit documents without storing them

into memory first. Use Direct Transmission
when using G3 Fax Communication.

2. Install Optional Memory (SD Memory

Card).

144

871

Overflow of the file management area occurred.

Wait until the machine finishes printing or
sending the documents.

Problem Solving

Information Code

Summary of Contents for E-Studio 190F



























































































































































Search results

Summary of Contents for E-Studio 190F

Reviews:

Toshiba E-Studio 190F, Operator'S Manual, Page: 140 / 154

Search results

Summary of Contents for E-Studio 190F

Reviews: