Getting started
2.
5
3
Squeeze the paper width guide, as shown and slide it to
the stack of paper until it lightly touches the side of the
stack.
N
OTES
:
• Do not push the paper width guide far enough to cause the
materials to warp.
• If you do not adjust the paper width guide, it may cause
paper jams.
Making connections
1
Connect a USB cable to the USB connector on your
machine. You need to buy a USB 2.0 compliant cable that
is not longer than 3 m.
2
Connect the other end of the cable to the USB port on your
computer.
See your computer User’s Guide if you need help.
To the USB port on your computer
N
OTE
: When using the USB connection, your machine
provides two USB modes; Fast and Slow. Fast is the default
mode. Some PC users may experience poor USB function in
the default mode. If this occurs, select Slow mode to achieve
successful results. For details about changing the USB mode,
see page 9.7.
Turning the machine on
1
Plug one end of the supplied power cord into the
power
receptacle
on the machine and the other end into a
properly grounded AC outlet.
2
Press the power switch to turn the machine on.
warming
up please wait
appears on the display indicating that the
machine is now on.
To view your display text in another language, see
C
AUTION
:
• The fuser area inside of the rear cover of your machine
becomes very hot when in use. Take care not to burn your
fingers when you access this area.
• Do not disassemble the machine with power on. If you do,
you may receive an electric shock.
