Toshiba e-studio 1050 Technical Training Manual Download Page 89 | Manualshive

Page: 89 / 224

Toshiba e-studio 1050 Technical Training Manual Download Page 89

PTM 2-64

B070/B071

2.8 PAPER FEED

2.8.1 OVERVIEW

1. Duplex Tray

6. Feed Roller

2. Relay Roller

7. Separation Roller

3. Upper Registration Roller 8. 3rd Tray (Universal)
4. Grip Roller

9. 2nd Tray (Universal)

5. Pick-up Roller

10. 1st Tray (Tandem)

This model has three paper tray feed stations. The 1st tray (10), the tandem feed tray,
holds 2,000 sheets of paper (1,000 sheets x 2 stacks). The tandem tray also be can
be converted to a 1,000-sheet tray for larger paper sizes with the optional A3/DLT
Feed Kit B331.
The 2nd tray (9) and 3rd trays (8) are universal trays and each can hold 500 sheets of
paper. To allow easy removal, the paper cassettes are not fastened to the trays with
screws.
All feed stations use an FRR feed system. Rotation of the pick-up roller (5) drives the
top sheet of paper to the feed (6) and separation (7) rollers. These rollers then take
over the paper drive. If the pick-up roller feeds more than one sheet, the separation
rollers rotate in the opposite direction and prevent all but the top sheet from passing
through to the registration rollers. The large grip rollers (4) feed paper from the trays in
the vertical paper path.

1

2

3

4

6

5

7

8

10

«
...
87
88
89
90
91
...
»

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments