manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 82 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 82

 

 

PTM 2-57 

B070/B071 

Toner Bottle Sensors 

 

 

When placing a toner bottle in the toner bank, the toner bottle pushes the lock arm [A] 
downwards. Then the lock arm catches the toner bottle and also pushes down lever 
[B]. This causes toner bottle sensor [C] to detect that a bottle has been installed (the 
actuator leaves the toner bottle sensor while the bottle is being inserted in the holder).  
When replacing a toner bottle, push the toner bottle release lever [D] to release the 
lock mechanism. While a toner bottle is supplying toner, the toner bottle opening rod is 
pulled to the rear and the lock plate [E] is lowered by the link [F] so that the toner 
bottle release lever cannot be pushed. Therefore, the toner bottle that is supplying 
toner is always locked in place, and the user cannot pull out the bottle until it is empty. 
 

B070D912.WMF 

B070D913.WMF

B070D914.WMF

[A]

[D]

[E]

[F]

[C]

[B] 

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments