manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 76 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 76

 

 

PTM 2-51 

B070/B071 

2.6.4 CROSSMIXING 

 
 

This copier uses a standard cross-mixing mechanism to keep the toner and developer 
evenly mixed. It also helps agitate the developer to prevent developer clumps from 
forming and helps create the triboelectric charge. 
The developer on the turning development rollers [A] is split into two parts by the 
doctor blade [B]. The part that stays on the development rollers forms the magnetic 
brush and develops the latent image on the drum. The part that is trimmed off by the 
doctor blade goes to the backspill plate [C]. 
As the developer slides down the backspill plate to the agitator [D], the mixing vanes 
[E] move it slightly toward the rear of the unit. Part of the developer falls into the auger 
inlet and is transported to the front of the unit by the auger [F]. 
 

B070D303.WMF 

B070D571.WMF

[C]

[D]

[F]

[E]

[B] 

[A] 

[F] 

[E] 

[C] 

[D]

[B]

[A] 

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments