manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 199 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 199

 

 

B070/B071 7-24 

PTM 

7.7  PUNCH UNIT B531 (OPTION) 

7.7.1  PUNCH UNIT DRIVE 

 

 
The punch unit makes 2 or 3 holes at the trailing edge of the paper. The number of 
holes depends on a selection made on the operation panel. 
The cam [A] has 2 punches on one side and 3 punches on the other, and is turned 
by the punch motor [B]. The punch motor turns on immediately after the trailing 
edge of the paper passes the entrance sensor. The punches on the cam rotate 
downward and punch holes in the paper. 
After punching a sheet of paper, the cam returns to home position and stops. 
Home position depends on whether 2 holes or 3 holes are being made, so there 
are two punch HP sensors. Punch HP sensor 1 [C] is used when 2-hole punching 
is selected, and punch HP sensor 2 [D] is used when 3-hole punching is selected. 
When the cut-out [E] enters the slot of the punch HP in use (sensor 1 or 2-hole 
punching or sensor 2 for 3/4-hole punching) the motor stops. 
The knob (not shown) on the front end of the punch unit can be turned in either 
direction to clear paper jammed in the punch unit. 
 

B531D102.WMF

[A]

[B] 

[C]

[D] 

[E] 

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments