manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 192 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 192

 

 

PTM 7-17 

B070/B071 

7.5.6 FEED-OUT 

 

 
After the copies have been stapled, the stack feed-out motor [A] starts. The pawl 
[B] on the stack feed-out belt [C] transports the set of stapled copies up and feeds 
it to the shift tray exit roller [D]. When stapling starts, the exit guide motor [E] opens 
the upper exit guide [F], which includes the upper shift tray exit roller [G], in order to 
feed out the leading edge of the copy set smoothly. The exit guide motor turns on 
again a certain time after stapling is complete, and the upper exit guide plate is 
lowered. Then the shift tray exit roller takes over the stack feed-out. 
The on-off timing of the exit guide motor is detected by the exit guide open sensor 
[H]. 
The stack-feed-out motor turns off when the pawl actuates the stack feed-out belt 
home position sensor [I]. 
 

B478D512.WMF

B478D519.WMF 

[B]

[C] 

[D]

[G] 

[I] 

[A]

[F] 

[H] 

[E]

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments