manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 189 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 189

 

 

B070/B071 7-14 

PTM 

 

 
 

Rotation (1) 

In the oblique staple position mode, the stapler rotation motor [A] rotates the 
stapler units [B] 45

°

 to counterclockwise after it moves to the stapling position. 

 

Rotation (2) 

When the staple end condition arises, the stapler motor moves the stapler to the 
front and the stapler rotation motor rotates the stapler unit to clockwise to remove 
the staple cartridge [C]. This allows the user to add new staples. 
Once the staples have been installed, and the front door closed, the stapler unit 
returns to its home position. As the stapler unit is returning to the home position, 
the stapler return sensor [D] is activated, the return solenoid [E] turns on and it 
assists the guide roller [F] to return to its guide (this guide directs the stapler during 
rotation). 
 

B478D514.WMF 

B478D515.WMF 

 

B478D523.WMF

[A] 

[B]

[C] 

[D]

[F]

[E]

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments