manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 167 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 167

 

 

B070/B071 6-18 

PTM 

6.5.10 FEED OUT 

 

 
After a set has been stapled, the stack feed out motor [A] switches on and drives 
the stack feed out belt [B]. The pawl [C] on the belt lifts the stapled stack and 
transports it to the exit rollers [D]. There are two pawls on the belt, to increase 
productivity. 
The exit guide plate [E] remains open until the leading edge of the stapled sheets 
has passed the prescribed distance from the tray exit rollers, then the exit guide 
plate closes, and the stapled sheets feed out to the tray [F]. 
A cam and pin [G], powered by the guide plate motor [H], opens and closes the 
guide plate. 
The stack feed out motor stops for 300 ms to allow the exit rollers to feed out the 
stapled sheets to the output tray. This pause prevents the copies from pushing out 
too far onto the tray. 
The stack feed out motor switches on again until the pawl actuates the stack feed 
out belt HP sensor [I]. 
 

B468D019.WMF

B468D018.WMF 

[E]

[F]

[G] 

[H]

[A]

[B]

[C] 

[D]

[I] 

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments