manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 165 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 165

 

 

B070/B071 6-16 

PTM 

6.5.9 STAPLER MOVEMENT 

The stapler performs horizontal and rotational movement in each of the four staple 
modes. 
 

Horizontal Stapler Movement 

 

 
The stapler movement motor [A] drives the timing belt [B] which moves stapler [C] 
left and right on a support bar [D]. 
When the Start key is pressed, the jogger fences move to the wait position 10 mm 
wider than the selected paper size, the stapler motor switches on and moves the 
stapler to the staple position and then switches off. The motor switches on and off 
for the time needed to position the stapler for the paper size selected for the job. 
If the stack is to be stapled at two locations, the stapler moves to the front position 
first, staples, moves to the back position, staples, and then returns to the home 
position.  

NOTE: 

SP6120 001~011 (Staple Jogger Adjustment). Use this SP to fine 
adjust the staple unit jogger fences for different paper sizes. For 
details, see section “5. Service Tables”. 

 

B468D016.WMF

[A]

[B]

[C]

[D] 

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments