manualshive.com logo in svg

Toshiba e-studio 1050, Technical Training Manual, Page: 141 / 224

Share
Download
Toshiba e-studio 1050 Technical Training Manual Download Page 141

 

 

B070/B071 5-8 

PTM 

5.5.3 PICK-UP AND FEED 

 
 

 
When a paper feed station is not selected, its separation roller solenoid [A] is de-
activated and the separation roller [B] can turn freely. 
When the paper feed station is selected and the Start key is pressed, the feed 
clutch [C], separation roller solenoid [A], and pick-up solenoid [D] turn on. 
When the feed clutch [C] actuates, it drives the feed roller [E], and turns the pick-up 
roller [F] because it is linked to the feed roller by an idle gear [G]. 
When the separation roller solenoid [A] turns on, the separation roller [B] contacts 
the paper feed roller [E] and turns with the feed roller, unless more than one sheet 
of paper is fed. The three trays of the LCT unit use the standard FRR mechanism. 

 Handling Paper> Paper Feed Methods> 

Forward and Reverse Roller 

(FRR)

 

When the pick-up solenoid [D] actuates, the pick-up roller [F] lowers until it contacts 
the top sheet of the paper stack and then sends it to the paper feed and separation 
roller.  
When the paper feed sensor [H] detects the leading edge of the paper, the pick-up 
solenoid de-actuates and lifts the pick-up roller [F], and the grip roller clutch [I] 
actuates and feeds the paper out of the tray. 
 

B511D105.WMF

[D]

[C] 

[I] 

[A] 

[H] 

[G]

[F]

[E] 

[B]

Summary of Contents for e-studio 1050

































































































































































































































Reviews:

No comments