Toshiba e-studio 1050 Technical Training Manual Download Page 119

Page: 119 / 224

PTM 3-3 B070/B071

SP Mode Button Summary

Here is a short summary of the touch-panel buttons.

(1)

Open All

Opens all SP groups and sublevels.

(2)

Close All

Closes all open groups and sublevels and restores the initial SP mode display.

(3)

Copy Window

Opens the copy window (copy mode) so you can make test copies. To return to the
SP mode screen, press SP Mode (highlighted) in the copy window.

(4)

SP Direct

Enter the SP code directly with the number keys if you know the SP number, then
press Enter key

. (SP Direct must be highlighted before you can enter the

number. Just press SP Direct if it is not highlighted.)

(5)

Exit

Press twice to leave the SP mode and return to the copy window to resume normal
operation.

(6)

SPnxxx

Press any group number to open a list of SP codes and titles for that group. For
example, to open the SP code list for SP1-nnn, press SP1XXX. If an SP has
sublevels, it is marked with a right pointing triangle.

(7)

Group

Press to scroll the display to the previous or next group.

(8)

Page

Press to scroll to the previous or next display in segments the size of the screen
display (page).

(9)

Line

Press to scroll the display to the previous or next line, line by line.

(10)

Prev Page

Next Page

Press to move the highlight on the left to the previous or next selection in the list.

Exit

SP Mode (Service)

Close All

Copy Window

SP Direct

Open All

X-XXX-XXX

SP2XXX

SP3XXX

SP5XXX

SP6XXX

SP7XXX

SP8XXX

SP4XXX

SP1XXX

Group

Page

Line

Page

Line

Group

COPY: SP1-001-001

Initial 0

14APR 2002 03:25

(2)

(1)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

B064S500.WMF

Summary of Contents for e-studio 1050

































































































































































































































Search results

Summary of Contents for e-studio 1050

Reviews:

Toshiba e-studio 1050, Technical Training Manual, Page: 119 / 224

Search results

Summary of Contents for e-studio 1050

Reviews: