Toshiba e-studio 1050 Technical Training Manual Download Page 113

Page: 113 / 224

PTM 2-88

B070/B071

2.12.4 AUTO OFF MODE

Auto off mode is used only if no optional printer/scanner unit is installed.

Entering auto off mode

The machine enters auto off mode when one of the following is done.

•

The auto off timer runs out after the last job (User Tools – System Settings – Timer
Setting – Auto Off Timer: default setting is 90 min)

•

The operation switch is pressed to turn the power off

What happens in auto off mode

When the machine enters auto off mode, the fusing lamps and all dc supplies except
+5VE/12VE (+5V/12V for energy saver mode) turn off.

Returning to stand-by mode

The machine returns to stand-by mode when the main operation switch is pressed.

Operation

Switch

Energy

Saver LED

Fusing Temp.

Approx.

Recovery

Time

System

+5V

Note

Off Off

Room Temp.

(Fusing lamp off)

360 s

Off

Only +5VE/+12VE is
supplied to the
Controller, MB, HDD.

Disabling auto off mode

If the user wishes to disable auto off mode, use the following user tool: User Tools –
System Settings – AOF (change the setting to ‘OFF’).

Summary of Contents for e-studio 1050

































































































































































































































Search results

Summary of Contents for e-studio 1050

Reviews:

Toshiba e-studio 1050, Technical Training Manual, Page: 113 / 224

Search results

Summary of Contents for e-studio 1050

Reviews: