Installing a Micro SIM card
To install a Micro SIM card, do the following:
1.
Click
Start -> Power
, and then select
Shut down
.
2.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
3.
Place the Micro SIM card into the Micro SIM card slot with the metal
connectors facing down.
4.
Press the Micro SIM card gently until it clicks into place.
Figure 4-15 Inserting the SIM card
1
2
1. Micro SIM card
2. Micro SIM card slot
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.
Do not touch the connectors on the SIM card or on the computer.
Debris on the connectors might cause access problems.
Removing a Micro SIM Card
To remove the Micro SIM card, do the following:
1.
Shut down the computer.
2.
Push the Micro SIM card until you hear a click to partially release it.
3.
Grasp the Micro SIM card and remove it.
GPS Function
Your computer might include a built-in GPS (Global Positioning System).
The performance of GPS varies depending on the environment. Failure to
pinpoint a location might happen.
Your current location might not be shown depending on the status of GPS
or the location. If you are obtaining your current location information from
the computer, your current location might not be detected due to the
information accuracy. Specifically, your current location might not be
detected in the following places or situations:
Inside or directly under a building
User's Manual
4-17
