33
Using the dynadock™ and Adjusting Settings
Adjusting video settings
(Sample Image) DisplayLink Manager
2
Select
Extend
or
Mirror
from the menu.
If you notice certain windows or other parts of your display are
missing when you disconnect your computer from the dynadock™,
you may need to de-select the Extend my Windows
®
desktop onto
this monitor checkbox in your Windows
®
Display Properties dialog
box to return the entire image to your primary screen.
You can also use the Windows
®
Display Properties screen to switch
between Extended mode and Mirror mode.
The external monitor connected to the dynadock™ may be identified
as either "2" or “3” on the Windows
®
Display Properties screen
(depending on your computer model), even though there may not be
three viewable displays.
Supported display modes
Three components make up the display mode: resolution, color
depth, and refresh rate. These components are defined as follows.
❖
Resolution:
The number of pixels displayed on the screen
horizontally and vertically.
❖
Color Depth:
The number of different colors that can be
shown on the screen at the same time.
❖
Refresh rate:
The speed at which the entire screen is
re-scanned. Higher frequencies reduce flicker.
NOTE
NOTE
NOTE
