dynadock™ User’s Manual
9
Back panel
(Sample Illustration) Connections on the back of the dynadock
Optical S/PDIF digital out port:
Use an optical S/PDIF
DB9 Serial port:
For connection to the serial device you
4 USB 2.0 ports:
For connection to USB peripherals.
cable (not provided) to connect to your digital audio equipment,
e.g., Dolby
®
Digital Surround Sound receiver and speaker system
To use this connection, your receiver must have an optical
S/PDIF input.
want to control.
10/100 Mbps Ethernet port:
For connection to the Ethernet
Cable holder holes:
Allows you to manage/keep cables organized
USB upsteam port:
For connection between the dynadock and
DVI video output port:
For connection to a DVI monitor
DC-IN:
For connection to the provided AC power adaptor.
network via a network cable (not provided).
once all of your devices are attached.
VGA video output port:
For connection to a VGA monitor (not
shown).
- or -
the host computer.
The dynadock always needs an external power supply
for operation, as it does not take power from the USB bus.
(shown).
Cable Lock Slot:
Allows you to connect a cable lock to
help prevent theft (not provided).
