19
Setting Up the dynadock 4K docking station
and Connecting Peripherals
6
Follow the on-screen instructions to finish the
installation.
You will need to read and accept the TOSHIBA software
license agreement when prompted, to proceed with the
installation.
7
Restart your computer if prompted.
Complete the software installation process before
connecting the dynadock 4K docking station to your
computer.
Restarting may take longer than usual if the computer's
operating system is configured to create a system restore
point after a new device is installed. This occurs after
initial installation only. When the computer restarts, the
dynadock 4K docking station is ready to use.
Assemble the dynadock 4K docking station
The dynadock 4K docking station's stand is optional. Slide
the dynadock 4K docking station onto the stand as shown
below.
(Sample Illustration) Attaching the stand to the dynadock 4K
docking station
NOTE
NOTE
NOTE
