manualshive.com logo in svg

Toshiba DX730 Series, User Manual

Share
Download
Toshiba DX730 Series User Manual Download Page 64

64

Getting Started

Turning off the computer

2

Click the 

Shut down

 button in the lower-right corner of the 

Start menu.

The computer closes all open programs, shuts down the 
operating system, and then turns off.

Turning off the computer more quickly

You can also turn off the computer by pressing the power button.

By default, pressing your computer’s power button shuts down your 
computer.

Restarting your computer

To start the computer up again, press the power button until the 
ON/OFF light glows white.

Using and configuring Hibernation mode

In order to put your system in hibernation using the Shut down 
button/menu, you will first need to enable hibernation mode.

To enable hibernation mode:

1

Click 

Start

, 

Control Panel

, 

System and Security

, and then 

Power Options

.

The Power Options window appears.

2

Click 

Change plan settings

 under the power plan to be 

customized.

The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen

Summary of Contents for DX730 Series
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands