background image

51

Getting Started

Recovering the Internal Storage Drive

7

Use the on-screen arrow buttons in 

The size of drive C:

 field 

to set the partition size.

8

Click 

Next

.

A confirmation message displays reminding you that all data 
will be lost during the recovery process. Be sure to save your 
work to external media before proceeding (see 

“Backing up 

your work” on page 82

). 

9

Click 

Next

 to begin the recovery.

When the recovery process is complete, a message displays 
indicating that the C: drive has been recovered.

10

Click 

Finish

 to restart the computer.

Creating recovery DVDs/media

It is strongly recommended that you create recovery DVDs/media. 
If the recovery files on your internal storage drive become 
corrupted or are deleted, you can restore your system from your 
recovery DVDs/media. Also, if your original internal storage drive 
fails, you can restore your system to a new internal storage drive 
from your recovery DVDs/media. 

When you create recovery DVDs/media, only the operating system 
files, applications, and drivers originally shipped with the computer 
are backed up to the external media and can be restored from this 
media. Any files that you created are not backed up on the recovery 
DVDs/media. You will need to separately back up the files you 
created; for more information, see 

“Backing up your work” on 

page 82

.

When you create recovery DVDs/media, the system will prompt 
you to insert several blank DVDs or connect one or more USB flash 
drives of a certain minimum capacity to your computer. The amount 
of space required for storing the recovery files varies by computer 
model. Follow the procedure below to determine how much space 
you will need for storing your system’s recovery files.

NOTE

Summary of Contents for DX730 Series
























































































































































































Reviews: