Toshiba DIGITAL Series Management Manual Download Page 17

Page: 17 / 192

1.SETTING ITEMS (USER)

SCAN 15

1 SETTING ITEMS (USER)

Set the following items for each color mode (Full Color/Auto Color, Gray Scale, or Black mode).

Item name

Description

RESOLUTION

Press the button of the desired resolution (dpi) for scans.

ORIGINAL MODE

Press the button of the desired mode for scans. ([ORIGINAL MODE] is not available in Gray Scale
mode.)

EXPOSURE

Select the desired exposure for scans.

To set the contrast manually, press

and set the desired contrast level.

To set the contrast automatically in accordance with the original, press [AUTO].

BACKGROUND
ADJUSTMENT

Select the desired background exposure for scans.

The higher the exposure set by pressing

, the lighter the background color.

The lower the exposure set by pressing

, the darker the background color.

Summary of Contents for DIGITAL Series
































































































































































































Search results

Summary of Contents for DIGITAL Series

Reviews:

Related manuals for DIGITAL Series

Brands by name

Popular brands

Toshiba DIGITAL Series, Management Manual

Search results

Summary of Contents for DIGITAL Series

Reviews:

Related manuals for DIGITAL Series

Brands by name

Popular brands