Toshiba DIGITAL Series Management Manual Download Page 152

Page: 152 / 192

3 MANAGING COUNTERS (COUNTER MENU)

150 DEPARTMENT MANAGEMENT



Resetting all department counters

You can clear all department counters.

This operation clears only the department counters. You cannot clear the total counter.

On the DEPT. MANAGEMENT menu screen, press [RESET ALL COUNTERS].

The message “CLEAR OK?” is displayed on the CONFIRMATION screen.

For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page:



P.138 “Logging on as administrator”

Press [YES].

All department counters are now cleared.

Press [NO] to cancel the clear operation.

Summary of Contents for DIGITAL Series
































































































































































































Search results

Summary of Contents for DIGITAL Series

Reviews:

Related manuals for DIGITAL Series

Brands by name

Popular brands

Toshiba DIGITAL Series, Management Manual

Search results

Summary of Contents for DIGITAL Series

Reviews:

Related manuals for DIGITAL Series

Brands by name

Popular brands