Toshiba DIGITAL Series Management Manual Download Page 145

Page: 145 / 192

3.MANAGING COUNTERS (COUNTER MENU)

DEPARTMENT MANAGEMENT 143

3 MANAGING COUNTERS (COUNTER MENU)



Editing department codes

You can edit an existing department code.

On the DEPT. MANAGEMENT menu screen, press [DEPARTMENT REGISTRATION].

The DEPARTMENT CODE screen is displayed.

For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page:



P.138 “Logging on as administrator”

Press the department button that you want to edit, and then [EDIT].

The message “This department code is already registered. Do you wish to replace this code?” is displayed on the
CONFIRMATION screen.

If the touch panel does not display the desired department code, press

to display the next page.

Press [YES].

The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following page:



P.154 “On-screen keyboard”

If changing the department name, enter a new department name and press [OK]. If not,
just press [OK].

The department code currently set is displayed on the EDIT DEPARTMENT CODE screen.

Summary of Contents for DIGITAL Series
































































































































































































Search results

Summary of Contents for DIGITAL Series

Reviews:

Related manuals for DIGITAL Series

Brands by name

Popular brands

Toshiba DIGITAL Series, Management Manual

Search results

Summary of Contents for DIGITAL Series

Reviews:

Related manuals for DIGITAL Series

Brands by name

Popular brands