manualshive.com logo in svg

Toshiba Carrier MMD-AP0246HPUL, Service Manual, Page: 42 / 98

Share
Download
Toshiba Carrier MMD-AP0246HPUL Service Manual Download Page 42

To find an indoor unit’s position from its address

 When checking unit numbers controlled as a group

1

2 

3

Stop

1 

SET

TIME

TIMER SET

TEST

FILTER

RESET

TEMP.

CL

FAN

SAVE

SWING/FIX

VENT

MODE

ON / OFF

UNIT  LOUVER

(Execute it while the units are stopped.)

The indoor unit numbers in a group are indicated one after another. The fan and louvers of the indicated units

are activated.

1

Push and hold the 

VENT

 and   buttons at the same time for more than 4 seconds.

•

ALL

ALL

ALL

ALL

ALL

 appears on UNIT No. on the LCD display.

• The fans and louvers of all the indoor units in the group are activated.

2

Push the 

UNIT  LOUVER

 button (left side of the button). Each time you push the button, the indoor

unit numbers are indicated one after another.

• The first-indicated unit number is the address of the header unit.

• Only the fan and louvers of the indicated indoor unit are activated.

3

Push the   button to finish the procedure.

All the indoor units in the group stop.

 

- 42 -

Summary of Contents for Carrier MMD-AP0246HPUL



































































































Reviews:

No comments