Touch Screen Controller
Owner's Manual
56
-EN
Delete an Power peak cut schedule
When using an outdoor unit that cannot operate cooling and heating at the same time, you can restrict its operation mode so
that it can only be set for either cooling or heating.
1
Tap [Operation mode restriction] in the [Functions] menu (P.53)
2
Select the operation mode and tap [OK]
●
NOTE
• Settings are reflected in all outdoor units.
• Even with restriction, the operation mode of the CONTROL tab can be selected. When a restricted operation mode is
selected, the Thermo OFF state is set.
You can restart the Unit if its operation becomes unstable.
The schedule is not executed during restart.
1
Tap [System reboot] in the [Functions] menu (P.53)
2
Tap [OK]
1
Tap [
1
-(2)
] with [
1
-(1)
2
Tap
3
Set the check box of the schedule you want to delete to
,
then tap [
3
-(1)
]
The selected schedule will be deleted.
●
NOTE
Also, when deleting a registered time, tap
and operate similarly.
Restrict operation mode (Operation mode restriction)
Restart the Unit (System reboot)
1
-(2)
1
-(2)
1
-(1)
1
-(1)
3
-(1)
3
-(1)
