Toshiba B-EX6T Series Key Operation Specification Download

Page: 144 / 160

143

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

1-dot check pattern is displayed. The upper left

corner dot is white.

Press any key.

Character display test

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

Character display

Press any key.

Contrast test

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

Displays with the minimum contrast.

Press any key.

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

Displays with the default contrast.

Press any key.

ONLINE LED turns on.

ERROR LED turns on.

Backlight turns on.

Displays with the maximum contrast.

Press any key.

End display

ONLINE LED turns on.

ERROR LED turns off.

Backlight turns on.

Press the [ENTER] or [CANCEL] key to return

to the upper-level menu.

9.13.3 KEY TEST

The test is performed in the following order.

(Start)



FEED key test



RESTART key test



PAUSE key test



UP key test



RIGHT key test



DOWN key test



LEFT key test



MODE key test



CANCEL key test



ENTER key test



(End)

The display language is English regardless of the LCD Language parameter setting.

LCD

Operation and LCD/LED status

FEED KEY TEST

Press the [FEED] key.

RESTART KEY TEST

Press the [RESTART] key.

Summary of Contents for B-EX6T Series

































































































































































Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands

Toshiba B-EX6T Series, Key Operation Specification

Search results

Summary of Contents for B-EX6T Series

Reviews:

Related manuals for B-EX6T Series

Brands by name

Popular brands