18. PRINT HEAD PRESSURE ADJUSTMENT LEVER
EO18-33031
(Revision Date: Mar. 2020)
18. PRINT HEAD PRESSURE ADJUSTMENT LEVER
18- 2
(2) B-EX4T1/B-EX4T3 series (Ribbon is centered)
If the ribbon wrinkles while using a narrow ribbon or when print data is positioned at the right or left side only,
basically adjust the side where wrinkles occur to
Low
and the other side to
High
to make the print head pressure
balance equal.
(3) B-EX6T series (Ribbon is centered)
As the effective print width is wide on the B-EX6T series, the print head pressure against the ribbon tends to
become uneven. If the ribbon wrinkles, basically adjust the center to
High
, the wrinkle side to
Low
, and the normal
side to
Middle
or
High
to make the print head pressure balance equal.
Ribbon wrinkle problem tends to occur depending on the various conditions, such as ribbon width, media width,
ribbon motor torque, and print head position.
For detailed information, please refer to the Supply Manual for the applicable model.
Ribbon
Media
Print head
Ribbon
Media
Print head
