10. ON LINE MODE
EM18-33031
10.10 LCD MESSAGES AND LED INCATIONS
10-24
11
EXCESS HEAD
TEMP
●
The thermal head temperature has
become excessively high.
No Yes
12 RIBBON
ERROR
●
▪
An abnormal condition occurred
with the sensor for determining the
torque of the ribbon motor.
▪
A ribbon jam occurred.
▪
The ribbon has been torn.
▪
The ribbon has not been set.
Yes Yes
13 REWIND
FULL
●
An overflow error has occurred in
the rewinder unit.
Yes Yes
14
SAVING ####KB/&&&&KB
or
SAVING %,%%%.%%%KB
●
External characters or PC
command save mode.
---
Yes
15
FORMAT ####KB/&&&&KB
or
FORMAT %,%%%.%%%KB
●
Initializing the storage area.
--- Yes
16 NOW
LOADING…
●
Downloading TrueType font or
BASIC program
--- Yes
17
MEMORY WRITE
ERR.
●
An error has occurred while writing
data into the memory for storage.
(USB memory, flash ROM on the
CPU board)
No Yes
18 FORMAT
ERROR
●
An erase error has occurred while
formatting the memory for storage
(USB memory, flash Rom on the
CPU board)
No Yes
19 MEMORY
FULL
●
Saving failed because of the
insufficient capacity of the memory
for storage (USB memory, flash
ROM on the CPU board)
No Yes
20
SYNTAX ERROR
Command error
(Refer to Notes 1 and 2)
●
A command error has occurred
while analyzing the command.
Yes
Yes
21 POWER
FAILURE
●
A momentary power interruption
has occurred.
(The LCD message may corrupt
before the error message is
displayed.)
No No
22 EEPROM
ERROR
●
A backup EEPROM cannot be
read/write pr.
No No