10. ON LINE MODE
EM18-33031
10.10 LCD MESSAGES AND LED INCATIONS
10-23
10.10 LCD MESSAGES AND LED INDICATIONS
No
LCD Message
2
nd
line
(English)
LED
indications
Printer status
Restoration by
the [RESTART]
key
Yes/No
Acceptance of
Status Request
and Reset
Command
Yes/No
ON
LINE
ERROR
1 ONLINE
●
In the online mode
---
Yes
●
In the online mode
(Communicating)
--- Yes
In the online mode with a ribbon
near end detected
(Note 1)
--- Yes
2 HEAD
OPEN
●
●
A feed or an issue was attempted
with the head opened.
--- Yes
●
A feed or an issue was attempted
with the head opened in a ribbon
near end state.
(Note 1)
--- Yes
3 PAUSE
●
●
In a pause state
Yes Yes
●
In a pause state with a ribbon near
end detected
(Note 3)
Yes Yes
4 COMMS
ERROR
●
A parity error or framing error has
occurred during communication by
RS-232C.
Yes Yes
5 PAPER
JAM
●
▪
A paper jam occurred during
paper feed.
▪
The media is not set properly.
▪
The media actually used and the
selected media sensor type do not
match.
▪
The media sensor position does
not align with the black mark
position.
▪
The actual media size and the
specified media length do not
match.
▪
The media sensor level is not
suitable for the actual media.
▪
The gap of pre-printed label
cannot be detected.
Yes Yes
6 CUTTER
ERROR
●
▪
A paper jam occurred in the
cutter.
▪
The cutter did not move from the
home position.
▪
The cutter cover was open.
Yes Yes
7 NO
PAPER
●
▪
The media has run out.
▪
The media has not been set.
▪
Media sensor level is not suitable
for the paper used.
Yes Yes
8 NO
RIBBON
●
The ribbon has run out.
Yes
Yes
9 HEAD
OPEN
●
A feed or an issue was attempted
with the head opened.
(Except media feed caused by the
[FEED] key or Expansion I/O)
Yes Yes
10 HEAD
ERROR
●
▪
A broken dot error has occurred in
the thermal head.
▪
The error has occurred in the
head driver.
Yes Yes
