manualshive.com logo in svg

Toshiba A7-ST7711, User Manual

Share
Download
Toshiba A7-ST7711 User Manual Download Page 75

75

Getting Started

Using the TouchPad™

5.375 x 8.375 ver 2.3

After the Delete Hard Disk Recovery Utility has completed, it 
assigns the appropriate drive letter (for example, E: drive) for 
the extra space and formats the drive.

Installing drivers and applications

The TOSHIBA Application Installer allows you to reinstall 
the drivers and applications that were originally bundled with 
your computer.

To reinstall drivers and applications:

1

Double-click the Toshiba Application Installer icon on the 
Windows desktop. You can also launch the application by 
clicking 

Start

, 

All

 

Programs

, 

Hard Disk Recovery 

Utilities

, and then 

Toshiba Application Installer

.

2

Click 

Next

.

3

Click the item(s) you want to install.

4

Click 

Install

.

5

Follow the on-screen prompts to complete the installation 
process.

Using the TouchPad

™

The TouchPad

™

, the small, smooth, square cutout located in 

front of the keyboard, is sensitive to touch and enables you to 
move the cursor with the stroke of a finger. Simply move 
your finger on the TouchPad in the direction you would like 
to move the cursor: 

❖

To move the cursor to the top of the page, push your 
finger forward on the TouchPad.

❖

To move the cursor to the bottom of the page, drag your 
finger toward yourself.

❖

To move the cursor to the right side of the page, slide 
your finger across the TouchPad from left to right.

Summary of Contents for A7-ST7711




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands