Toshiba A7-ST7711 User Manual Download

Page: 53 / 307

Getting Started

Using the computer for the first time

5.375 x 8.375 ver 2.3

Turning on the power

To turn on the computer:

Make sure any external devices (such as the AC adaptor,
if you plan to use AC power rather than battery power)
are properly connected and ready.

Check to ensure that all optical drives are empty.

Press and hold the power button in until the power button
and the on/off light on the system indicator panel glow
green—about one second.

(Sample Illustration) Turning on the power

The preinstalled operating system will load
automatically.

When you turn on the computer for the first time, do not turn
off the power again until the operating system has loaded
completely.

Summary of Contents for A7-ST7711




















































































































































































































































































































Search results

Summary of Contents for A7-ST7711

Reviews:

Related manuals for A7-ST7711

Brands by name

Popular brands

Toshiba A7-ST7711, User Manual

Search results

Summary of Contents for A7-ST7711

Reviews:

Related manuals for A7-ST7711

Brands by name

Popular brands