manualshive.com logo in svg

Toshiba A7-ST7711, User Manual

Share
Download
Toshiba A7-ST7711 User Manual Download Page 143

143

Exploring Your Computer’s Features

Setting up for communications

5.375 x 8.375 ver 2.3

1

Plug one end of a telephone cable (purchased separately) 
into the modem port on the right side of the computer. 

 

(Sample Illustration) Connecting the telephone cable to the 
modem port

2

Connect the other end to the RJ-11 wall jack.

(Sample Illustration) Connecting to a wall jack

Connect the built-in modem only to ordinary analog phone 
lines.

Never connect the built-in modem to a digital line 
(ISDN).

Never connect the built-in modem to the digital 
connector on a public telephone or to a digital private 
branch exchange (PBX).

Never connect the built-in modem to a key telephone 
system for residences or offices.

Connection to any communication line other than an analog 
phone line could cause a computer system failure.

NOTE

Summary of Contents for A7-ST7711




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands