Toshiba A60 Series User Manual Download Page 175

Page: 175 / 197

Internal Modem Guide

TOSHIBA A60 Series

F-1

TOSHIBA A60 Series

Version

Last Saved on 13/05/2004 10:37

ENGLISH using Euro_M.dot –– Printed on 13/05/2004 as IM_A60EN

Appendix F

Internal Modem Guide

This appendix describes how to install and the remove the internal
modem.

Do not disassemble the computer beyond the steps described in this
instruction or touch any components not specifically described.

Installing the modem board

The internal modem is preinstalled. The following is for information only.

To install the modem board, follow the steps below.

Save your data, quit Windows and turn off the power.

Disconnect the AC adaptor and any other peripheral devices.

Turn the computer upside down and remove the battery pack.

Remove one screw securing the modem cover and remove the cover.

Remove two screws, which you use later to secure the modem board.

Seat the modem board.

Connect the modem board cable.

Secure the modem board with two screws removed in step 5.

Seat the modem board cover and secure it with one screw.

10.

Install the battery pack.

TOSHIBA A60 Series

User's

Manual

F-1

Summary of Contents for A60 Series






































































































































































































Search results

Summary of Contents for A60 Series

Reviews:

Related manuals for A60 Series

Brands by name

Popular brands

Toshiba A60 Series, User Manual

Search results

Summary of Contents for A60 Series

Reviews:

Related manuals for A60 Series

Brands by name

Popular brands