Troubleshooting
TOSHIBA A60 Series
9-19
TOSHIBA A60 Series
Version
1
Last Saved on 13/05/2004 10:37
ENGLISH using Euro_M.dot –– Printed on 13/05/2004 as IM_A60EN
Sound system
Problem Procedure
No sound is heard
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure the
sound function is enabled and that settings for
I/O address, Interrupt level and DMA are correct
for your software and do not conflict with other
hardware devices that you may have connected
to the computer.
If problems persist, contact your dealer.
TV output signal
Refer also to your TV set’s documentation.
Problem Procedure
Display on TV is poor
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
No display
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys
Fn + F5
to change the display.
Refer to Chapter 5, Keyboard.
If problems persist, contact your dealer.
If you turn the computer off in Resume mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
