manualshive.com logo in svg

Toshiba A60 Series, User Manual, Page: 129 / 197

Share
Download
Toshiba A60 Series User Manual Download Page 129

 

Optional Devices 

TOSHIBA A60 Series 

 8-3 

TOSHIBA A60 Series

 Version   

1

   Last Saved on 13/05/2004 10:37 

ENGLISH using  Euro_M.dot –– Printed on 13/05/2004 as IM_A60EN 

Removing a PC card 

To remove the PC card, follow the steps below. 

1. 

Open the 

Safety Remove Hardware

 icon on the system tray and 

disable the PC card.

 

2. 

Press the eject button of the PC card you want to remove to extend 
the button.

 

3. 

Press the extended eject button to pop the card out slightly.

 

4. 

Grasp the PC card and remove it.

 

 

Removing the PC card 

Memory expansion 

You can install additional memory in the computer’s memory module to 
increase the amount of RAM. 

Only memory module with the following parts numbers can be installed: 
 256 

MB 

 512MB 
 1024MB 

  

Summary of Contents for A60 Series






































































































































































































Reviews:

No comments