Toshiba 9000 User Manual Download Page 263

Page: 263 / 294

Hot Keys

Power usage mode

263

Select the Screen Saver tab.

Click the Password Protected check box.

Click the Change button.

Type the desired password.

Retype the password to confirm it and click OK.

Click OK.

Power usage mode

This hot key displays the power usage pop-up window and
cycles through the battery save modes.

The power usage modes in the Windows

operating system

under battery power are:

Long Life

Normal

High Power

DVD Playback

Presentation

Super Long Life

The power usage mode in Windows 2000 under AC power
is Full Power only.

The properties of each mode are set in the Toshiba Power
Saver utility. For more information, see

“Power Saver” on

page 175

Summary of Contents for 9000







































































































































































































































































































Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands

Toshiba 9000, User Manual

Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands