Toshiba 8200 - Tecra - PIII 750 MHz, User Manual

Page: 66 / 300

66
Connecting Other External Devices
Connecting external speakers or headphones
Connecting external speakers or headphones
To attach an external stereo output device:
1 Locate the headphone jack on the left side of the computer.
2 Using any necessary adapters, plug the cable from the
external audio device into the headphone jack. The
headphone jack requires a 3.5 mm 16-ohm stereo jack.
For more information on using headphones or external speakers,
see
“Playing an audio CD-ROM” on page 140 , or “WinDVD” on
page 153 .
Connecting an external microphone
Your computer comes equipped with an internal microphone, but
to record higher quality sounds, you can attach an external
microphone:
1 Locate the microphone jack on the left side of the computer.
2 Plug the microphone cord into the microphone jack.
3 Turn on the microphone.
The internal microphone is automatically disabled.
Once the external microphone is connected, the recording process
is the same as with the built-in microphone. For more information,
see
“Recording sounds” on page 138 .