Toshiba 8200 - Tecra - PIII 750 MHz, User Manual

Page: 187 / 300

187
Toshiba Utilities
TSETUP
By changing any of the options that appear in the dialog boxes and
clicking Apply, you can reconfigure that function. Any options
that you change will become default settings when you restart
your system.
TSETUP
TSETUP is the MS-DOS
®
-based, Toshiba configuration-
management tool, similar to Hardware Setup available through
Windows. You can access TSETUP during startup or while in
Windows.
HINT: TSETUP doesn’t run from within Windows. You must
exit Windows and run TSETUP while in MS-DOS mode.
There are two methods for accessing TSETUP:
❖
If your system has either Windows 98 Second Edition or
Windows NT installed, hold down the
Esc
key, then turn on
the computer. When you receive the following message:
“Check system. Then press [F1] key,” press
F1.
❖
If your system has Windows 98 Second Edition installed, turn
on the computer, and hold down
F8
until the startup menu
appears. Use the down arrow key to move the cursor to item 6
(Safe Mode Command Prompt Only) on the list and press
Enter.
This will take you to an MS-DOS screen. At the MS-
DOS prompt, type
cd \windows
and press
Enter.
Then, type
TSETUP
and press
Enter.