Toshiba 8100 series, User Manual

Page: 259 / 350

Part II: Technical Reference
Troubleshooting Guide
DVD operating problems–Windows 98 Second Edition
233
You may have connected the printer while the computer was
turned on. Disable Resume Mode (if appropriate), turn off the
computer, and turn off the printer. Turn the printer back on, make
sure it’s ready (on line), then turn the computer back on.
The printer doesn’t print what I see on the screen.
Many programs display information on the screen differently from
the way they print it. See if your program has a print preview
mode. This mode lets you see your work exactly as it will print.
Contact the software manufacturer for more information.
DVD operating problems–
Windows 98 Second Edition
If you experience a problem playing DVDs, you may be able to
fix the problem yourself.
For general problems playing a DVD title, try the following steps:
1 Check that the disc is in a format that the drive supports
(DVD-ROM, DVD-R, or DVD-RW).
2 Ensure that the drive is properly installed in the SelectBay. It
must be inserted completely.
3 Ensure that the DVD-ROM disk is properly inserted in the
drive tray.
4 Ensure that the Display properties are not True Color (24-bit).
If it is set to 24-bit color, there will be a video format error. To
verify your display settings:
❖
Click Start , Settings , Control Panel , and double-click
Display .
❖
Click on the Settings tab and check the Color Palette . It
should be set to High Color (16-bit).
❖
If it is not set to High Color, change the settings to 16-bit
color and click OK .