84
Basic features
Displaying 3D Important Information
1
Press the
SETUP
button.
2
Select
3D
>
3D Important Info
.
Read through the information.
3
Press the
t
/
u
(arrow) buttons to select
Yes
or
No
and press the
OK
button.
Adjusting 2D to 3D depth
With this feature, you can adjust the level of 3D depth.
Within the Menu:
1
Press the
SETUP
button.
2
Select
3D
>
2D to 3D Depth
and press the
OK
button.
3
Press the
t
/
u
(arrow) buttons to select either
1
,
2
,
3
,
4
, or
5
, and
press the
OK
button.
Within the Quick menu:
1
Press the
QUICK
button in 2D to 3D mode.
2
Select
3D Settings
>
2D to 3D Depth
.
3
Press the
t
/
u
(arrow) buttons to select either
1
,
2
,
3
,
4
, or
5
, and
then press the
OK
button.
Switching left and right images
The left and right images of the glasses can be swapped. If 3D images
look blurred, switch the left and right sides of the 3D image.
1
Press the
QUICK
button to open the Quick menu.
2
Select
3D Settings
>
Left and Right Image
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Swapped
.
Adjusting your viewing position (for 65/84L9300U only)
If you experience a double image when viewing 3D content, adjust your
viewing position.
1
Press the
SETUP
button.
2
Select
3D
>
3D Test Pattern
and press
OK
.
The
3D Test Pattern
is displayed.
3
Put on the 3D glasses (supplied).
4
Adjust your viewing position so that there is no double image effect.
For the correct position for viewing 3D content, see page 8.
Using 3D functions