manualshive.com logo in svg

Toshiba 58L9300U, User Manual, Page: 25 / 202

Share
Download
Toshiba 58L9300U User Manual Download Page 25

 

Introduction 

25

Left side

5 

Analog Video Port

—Analog Video input. Connect using a 

commercially available conversion cable.

6 

3 HDMI

™

 Ports

—High-Definition Multimedia Interface input 

receives digital audio and uncompressed digital video from an 

HDMI

™

 device or uncompressed digital video from a DVI device. 

HDMI

™

 connection is necessary to receive 1080p and 4K signals.

7 

ARC HDMI

™

 only port

—Audio Return Channel (ARC) enables 

the audio signal of the TV to be sent to an AV amplifier via the 

HDMI cable.

8 

Digital Audio Jack

—Optical audio output in Dolby

®

 Digital or 

PCM (pulse-code modulation) format for connecting an external 

Dolby

®

 Digital decoder, amplifier, A/V receiver, or home theater 

system with optical audio input.

9 

2 USB Ports

—Used to access video, music, or photo files with 

USB device. Works with the wireless keyboard.

10 

SD card slot

—Used to access video, music, or photo files with SD 

card.

 

TV front and side panel controls and connections

Summary of Contents for 58L9300U











































































































































































































Reviews:

No comments