manualshive.com logo in svg

Toshiba 5205 S705 - Satellite - Pentium 4-M 2.4 GHz, User Manual

Share
Download
Toshiba 5205 S705 - Satellite - Pentium 4-M 2.4 GHz User Manual Download Page 94

94

Learning the Basics

Using the DVD-ROM or Multifunction drive

5.375 x 8.375 ver 2.4.0

A special feature allows you to play audio CDs even when the 
computer is turned off. For more information, see 

“CD/DVD 

control buttons” on page 95

.

If your computer has a DVD-ROM/CD-RW multifunction 
drive, you can also write files (including music) to a CD-
Recordable (CD-R) or CD-ReWritable (CD-RW) disc.

Drive components and control buttons

The DVD-ROM or Multifunction drive is on the right side of 
the computer. The CD/DVD control buttons are located at the 
front edge of the computer and can be accessed when the 
display panel is closed or open.

Components

DVD-ROM or Multifunction drive 

Use the eject button to open the disc tray. This button requires 
power to operate. 

Never press the eject button or turn off the computer while the 
disk/disc activity light is flashing. Doing so could damage the 
disc or the drive.

Eject button

Manual eject button

DVD-ROM or Multifunction drive

Summary of Contents for 5205 S705 - Satellite - Pentium 4-M 2.4 GHz




































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands