manualshive.com logo in svg

Toshiba 5205 S705 - Satellite - Pentium 4-M 2.4 GHz, User Manual

Share
Download
Toshiba 5205 S705 - Satellite - Pentium 4-M 2.4 GHz User Manual Download Page 39

39

Front with the display closed

The infrared port allows cable-free communication with 
another device, such as a computer or printer, that has a 
compatible infrared port.

The display latch keeps the display panel closed and locked. 
To open the display panel, slide the display latch to the right 
and raise the panel.

The volume control dial lets you adjust the loudness of the 
system speakers. 

Back

The modem port lets you use a RJ11 telephone cable to 
connect the modem directly to a standard telephone line. For 
more information, see 

“Connecting the modem” on page 104

. 

Display latch

Infrared port

Volume control dial

LAN port

 DC-IN

Modem port

Cooling vents

Summary of Contents for 5205 S705 - Satellite - Pentium 4-M 2.4 GHz




































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands