Toshiba 5105-S501 - Satellite - Pentium 4-M 1.7 GHz User Manual Download Page 116

Page: 116 / 314

116

Learning the Basics

Using Hibernation

5.375 x 8.375 ver 2.4.0

The Turn off computer window appears.

Sample Turn off computer window with shift key held down to
show Hibernate option

The computer saves the state of the system, including all open
programs and files, to the hard disk. Then the computer turns
itself off.

If you are using the Windows

XP Pro operating system and

are a member of a domain, power off the computer using
Hibernation as follows:

Click

Start

Shut Down

The Shut Down window appears.

Select

Hibernate

from the drop-down list of options.

Click

The computer saves the state of the system, including all open
programs and files, to the hard disk. Then the computer turns
itself off.

Going into Hibernation mode more quickly

❖

By pressing the power button

❖

By closing the display panel

❖

By pressing the hotkey combination Fn+F4

To put the computer into Hibernation mode by pressing the
power button and/or closing the display, you must preset the
mode:

Click

Start

Control Panel

Summary of Contents for 5105-S501 - Satellite - Pentium 4-M 1.7 GHz



























































































































































































































































































































Search results

Summary of Contents for 5105-S501 - Satellite - Pentium 4-M 1.7 GHz

Reviews:

Related manuals for 5105-S501 - Satellite - Pentium 4-M 1.7 GHz

Brands by name

Popular brands

Toshiba 5105-S501 - Satellite - Pentium 4-M 1.7 GHz, User Manual

Search results

Summary of Contents for 5105-S501 - Satellite - Pentium 4-M 1.7 GHz

Reviews:

Related manuals for 5105-S501 - Satellite - Pentium 4-M 1.7 GHz

Brands by name

Popular brands