92
Setting up your TV
Setting the sleep timer
To playback DivX HD content:
v
To play in fast reverse or fast forward directions, press the
or
button during playback. Each time you press the
or
button, the playback speed will change.
v
If the content contains no chapter, this TV generates original
chapter point in 10% increments for 10 chapters in total, that
are accessible by using the Number buttons on the remote
control.
During playback, press the
button to skip to the beginning of the
next chapter.
When the
button is pressed twice in succession, it will repeat
two times of above.
If the
button is pressed at the last chapter, the confirmation
message will appear.
If
Yes
is selected, playback will skip to the beginning of the next
content.
Press the
button to skip to the beginning of the current chapter.
When the
button is pressed twice in succession, it will skip to
the beginning of the previous chapter. If the
button is pressed
twice continuously at the first chapter, playback of the current
content will stop and the confirmation message will appear. If Yes is
selected, playback will skip to the beginning of the previous
content.
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1
Press the
SLEEP
button on the remote control to set the length
of time the TV remains on until the TV turns off.
2
Repeatedly press the
SLEEP
button to increase the time in
10-minute increments, or press the
▲/▼(arrow) buttons to
increase or decrease the time in 10-minute increments, to a
maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1
In
Timers
menu, highlight
Sleep Timer
, and then press the
OK
button.
