Toshiba 40L3400U User Manual Download Page 73

Page: 73 / 143

Setting up your TV

Adjusting the audio

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble and

balance.
To adjust the audio quality:

Press the

MENU

button and open the

Sound

menu.

Press the ▲/▼(arrow) buttons to highlight the item you wish to

adjust (Bass, Treble, or Balance), and then press the

button.

Press the ◄

►(arrow) buttons to adjust the level.

◄ makes the bass or treble weaker or increases the balance

in the left channel (depending on the item selected).

►

makes the bass or treble stronger or increases the

balance in the right channel (depending on the item

selected).

DTS TruSurround™

This technology delivers high quality surround sound and expanded

sound field over two speakers.

To turn on

DTS TruSurround

Press the

MENU

button and open the

Sound

menu.

Highlight

DTS TruSurround

field, and then press the

button.

Press the ▲/▼(arrow) buttons to select

, and then press the

button

Sound Mode

Select the

Sound Mode

your prefer.

To select a

Sound Mode

Press the

MENU

button and open the

Sound

menu.

Highlight

Sound Mode

field, and then press the

button.

Press the ▲/▼(arrow) buttons to select

Sound Mode

, and then

press the

button.

Stable Sound

The Stable Sound

feature limits high volume levels and prevents

the extreme changes in volume that can occur when channels are

changed or a program switches to a commercial.
To turn on

Stable Sound

Press the

MENU

button and open the

Sound

menu.

Adjusting the audio

Summary of Contents for 40L3400U
















































































































































Search results

Summary of Contents for 40L3400U

Reviews:

Related manuals for 40L3400U

Brands by name

Popular brands

Toshiba 40L3400U, User Manual

Search results

Summary of Contents for 40L3400U

Reviews:

Related manuals for 40L3400U

Brands by name

Popular brands