29
Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
When you use ColorStream
TM
HD or Video, switch AV input mode
appropriately.
To view antenna or Cable channels:
Select the
ANT/CABLE
video input source on the TV.*
To view the DVD player:
Turn on the DVD player. Select the
COLORSTREAM HD
video
input source on the TV.*
To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the
COLORSTREAM HD
video input source on the TV.*
To view the VCR or view and record antenna channels:
Turn on the VCR. Tune the VCR to the channel you want to watch.
Select the
VIDEO
input source on the TV.*
To record a TV program while watching a DVD:
Turn on the VCR. Tune the VCR to the channel to record. Select the
COLORSTREAM HD
video input source on the TV* to view the
DVD.
*To select the video input source, press the
INPUT
button on the
remote control, see
“Selecting the video input source” on page 54.
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.
Connecting an HDMI
®
or DVI device to the HDMI
®
input
The HDMI
®
input on your TV receives digital audio and
uncompressed digital video from an HDMI
®
source device, or
uncompressed digital video from a DVI (Digital Visual Interface)
source device.
This input is designed to accept HDCP (High- Bandwidth Digital-
Content Protection) program material in digital form from EIA/
CEA-861-D– compliant
[1]
consumer electronic devices (such as a
set-top box or DVD player with HDMI
®
or DVI output).
The HDMI
®
input can accept and display various signal formats.
For detailed signal specifications, see
. Supported Audio format: Linear PCM, sampling rate
32/44.1/48 kHz.
